Brand Name: | LCS Compliance Laboratory |
Model Number: | PSE certification |
MOQ: | 1pcs |
Price: | 100USD |
Payment Terms: | L/C, D/A, D/P, T/T |
Certification introduction
PSE certification is Japan's compulsory safety certification, which is used to prove that electrical and electronic products have passed the safety standard test of Japan's Electrical and Material Safety Law (DENAN Law) or international IEC standards. Japan's DENTORL Law (Electrical Devices and Materials Control Law) stipulates that 506 products must pass safety certification before entering the Japanese market. Among them, 165 types of Class A products should obtain the diamond-shaped PSE mark, and 341 types of Class B products should obtain the circular PSE mark.
From April 1, 2001, the "Electrical Products Control Law (DENTORL)" has been officially renamed as the "Electrical Products Safety Law (DENAN)". Different from the agreement-based control of the previous regulatory system, the new system will ensure product safety by unofficial organizations.
PSE certification basic information
Is it mandatory: Mandatory
Certificate validity: for diamond, 3-7 years, based on product. For round shapes, there is no validity period and no certificate. Only VOC can be issued.
Factory inspection requirements: For diamond-shaped products, only the first factory inspection is required, and no annual inspection is required. For round shapes, no factory inspection required
Licensee Requirements: For Diamond, Factory/Importer. For round shapes, no requirements
Technical information: Voltage frequency AC 100V, 50Hz /60Hz, plug JIS 8303
Certification classification
According to Japan's "Electrical Product Safety Law", PSE certification is divided into two categories.
PSE Diamond Certification: Among them, there are 165 products that are likely to cause electric shock, fire and other accidents and are relatively dangerous, and are classified as "Specific Electrical Products - called Class A Electrical Products", such as chargers, adapters, etc.;
PSE circular certification: The remaining 341 less harmful products are classified as "non-specific electrical products - called Class B electrical products", most of which are large and small household appliances, lighting products, lithium batteries, etc.
Applicable product range
Diamond PSE
Wires, wiring equipment, current limiters, transformers, ballasts, electric heating appliances, electric power application machinery and equipment, AC electrical machinery and equipment, portable generators, other AC machinery and equipment, wire tubes, small AC motors, light sources and light sources Applications include mechanical appliances, batteries, etc., which fall within the scope of products stipulated in the Specific Electrical Appliances Safety Law, such as: DC power supply devices, switches and sockets, electric water heaters, power cords and plugs, other household appliances transformers (AC-AC power supply products), etc. 165 products.
Round PSE
Products that fall outside the scope of the Specific Electrical Appliances Safety Law include: electric blankets, electric steamers, electric hair curlers, electric ovens, microwave ovens, hair humidifiers, refrigerators, electric mixers, electric egg cookers, and electric thermos basins , hair dryers, electric humidifiers, projectors, washing machines, incandescent light bulbs, fluorescent lamps, table lamps, decorative lights, advertising lights, lithium batteries and all LED light bulbs and LED lamps, etc. 341 products.
application process
1. The customer prepares samples and materials and submits them to the testing agency
2. The testing agency laboratory conducts the test. If it is PSE round, NTEK will issue a statement letter.
3. For PSE diamonds, factory inspection is also required.
4. After passing the test and factory inspection, the certification agency issues a PSE diamond certificate
Application materials
1. Application submission information: relevant application form
2. Test preparation materials
3. CB report (including Japan’s difference test)
4. Circuit diagram
5. PCB design drawings related to safety regulations
6. Specifications for transformers and coil parts
7. List of key components and their certificates
8. Japanese user manual or assembly manual
9. Japanese nameplates and warning signs (including PSE mark and notified supplier name)
10. Structural data table
11. Factory production list and calibration certificate, etc. (for factory inspection)
12. Samples provided for testing: It varies according to the application standards and certification agencies. Usually, 5pcs samples are provided if there is CB, and 10pcs samples are provided if there is no CB.
Brand Name: | LCS Compliance Laboratory |
Model Number: | PSE certification |
MOQ: | 1pcs |
Price: | 100USD |
Payment Terms: | L/C, D/A, D/P, T/T |
Certification introduction
PSE certification is Japan's compulsory safety certification, which is used to prove that electrical and electronic products have passed the safety standard test of Japan's Electrical and Material Safety Law (DENAN Law) or international IEC standards. Japan's DENTORL Law (Electrical Devices and Materials Control Law) stipulates that 506 products must pass safety certification before entering the Japanese market. Among them, 165 types of Class A products should obtain the diamond-shaped PSE mark, and 341 types of Class B products should obtain the circular PSE mark.
From April 1, 2001, the "Electrical Products Control Law (DENTORL)" has been officially renamed as the "Electrical Products Safety Law (DENAN)". Different from the agreement-based control of the previous regulatory system, the new system will ensure product safety by unofficial organizations.
PSE certification basic information
Is it mandatory: Mandatory
Certificate validity: for diamond, 3-7 years, based on product. For round shapes, there is no validity period and no certificate. Only VOC can be issued.
Factory inspection requirements: For diamond-shaped products, only the first factory inspection is required, and no annual inspection is required. For round shapes, no factory inspection required
Licensee Requirements: For Diamond, Factory/Importer. For round shapes, no requirements
Technical information: Voltage frequency AC 100V, 50Hz /60Hz, plug JIS 8303
Certification classification
According to Japan's "Electrical Product Safety Law", PSE certification is divided into two categories.
PSE Diamond Certification: Among them, there are 165 products that are likely to cause electric shock, fire and other accidents and are relatively dangerous, and are classified as "Specific Electrical Products - called Class A Electrical Products", such as chargers, adapters, etc.;
PSE circular certification: The remaining 341 less harmful products are classified as "non-specific electrical products - called Class B electrical products", most of which are large and small household appliances, lighting products, lithium batteries, etc.
Applicable product range
Diamond PSE
Wires, wiring equipment, current limiters, transformers, ballasts, electric heating appliances, electric power application machinery and equipment, AC electrical machinery and equipment, portable generators, other AC machinery and equipment, wire tubes, small AC motors, light sources and light sources Applications include mechanical appliances, batteries, etc., which fall within the scope of products stipulated in the Specific Electrical Appliances Safety Law, such as: DC power supply devices, switches and sockets, electric water heaters, power cords and plugs, other household appliances transformers (AC-AC power supply products), etc. 165 products.
Round PSE
Products that fall outside the scope of the Specific Electrical Appliances Safety Law include: electric blankets, electric steamers, electric hair curlers, electric ovens, microwave ovens, hair humidifiers, refrigerators, electric mixers, electric egg cookers, and electric thermos basins , hair dryers, electric humidifiers, projectors, washing machines, incandescent light bulbs, fluorescent lamps, table lamps, decorative lights, advertising lights, lithium batteries and all LED light bulbs and LED lamps, etc. 341 products.
application process
1. The customer prepares samples and materials and submits them to the testing agency
2. The testing agency laboratory conducts the test. If it is PSE round, NTEK will issue a statement letter.
3. For PSE diamonds, factory inspection is also required.
4. After passing the test and factory inspection, the certification agency issues a PSE diamond certificate
Application materials
1. Application submission information: relevant application form
2. Test preparation materials
3. CB report (including Japan’s difference test)
4. Circuit diagram
5. PCB design drawings related to safety regulations
6. Specifications for transformers and coil parts
7. List of key components and their certificates
8. Japanese user manual or assembly manual
9. Japanese nameplates and warning signs (including PSE mark and notified supplier name)
10. Structural data table
11. Factory production list and calibration certificate, etc. (for factory inspection)
12. Samples provided for testing: It varies according to the application standards and certification agencies. Usually, 5pcs samples are provided if there is CB, and 10pcs samples are provided if there is no CB.