Japan TELEC Testing & Certification,What is Japan TELEC Testing & Certification ?

The Radio Act requires type approval (i.e. technical regulation conformity certification) for specified radio equipment. TELEC certification is mandatory, and the certification body is a registered certification body recognized by MIC in the designated radio equipment range.
TELEC certification is also called MIC certification. TELEC (Telecom Engineering Center) is the main registered certification body for radio equipment compliance certification in Japan. MIC (Ministry of Internal Affairs and Communications) is the Japanese government agency that controls radio frequency equipment. MIC is the Japanese general affairs agency. The province is responsible for compiling regulations and standards. TELEC is only one of the designated issuing agencies for MIC, so there is nothing wrong with calling TELEC certification/MIC certification.

TELEC certification standards

For technical standards for certification, please refer to the classification and technical standards of designated radio equipment listed in the technical regulations compliance certification system on its official website. It is worth noting that if there are any differences between these technical standards and the technical requirements of the Radio Regulatory Commission Rules No. 18, the Radio Regulatory Commission Rules No. 18 shall prevail.
TELEC certification type

TELEC certification includes test certification (Test Certification) and type certification (Type Certification). Test certification is a verification for each equipment unit, and the certification is only valid for each verified equipment unit; type certification refers to a verification of samples of a batch of equipment of the same design and manufacture, and the certification is valid for this batch of equipment. Effective, but if the design or manufacturing of the device changes, the device will need to be recertified. It is worth noting that the use of non-low-power radio stations and their terminal equipment requires application for a license from the MIC. In addition, there are two situations for compliance certification of telecommunications terminal equipment: for ordinary telephone equipment, JATE certification is required as required by the Telecommunications Act; for wireless terminal equipment, in addition to JATE certification as required by the Telecommunications Act, it is also required TELEC certification as required by the Radio Act.

TELEC certified products

1.2.4G products
2.Bluetooth products
3.wifi products
4.RFID products

illustrate:
1. It is recommended that all submitted documents be in Japanese. English documents are also accepted. Test reports can be in the language used by the local testing agency.

2.TELEC is Japan’s mandatory certification for wireless products, somewhat similar to the domestic SRRC. It follows Japan's radio wave law. The specific test specifications follow the MIC (Ministry of Internal Affairs and Communications of Japan) Notice No. 88 regulations
3. The test items for WiFi and Bluetooth products are basically similar to the European standard EN300 328. Among them, the standard used by 2.4GHz WiFi products (802.11b/g, 2412~2472 MHz) and Bluetooth products is MIC Notice No.88 Annex43, but for the 14 channels of 2.4GHz WiFi products (Channel 14: 2471 ~ 2497MHz), a separate Use Annex44 for testing and reporting.
4. For 5GHz WiFi products (802.11a, 5180~5320MHz, W52 Band and W53 Band), the test standard followed is Annex45. However, it should be noted that the data shows that MIC will modify Annex45 in the near future and 5.6GHz equipment (Band W56 ) is also classified as Annex45, and has more stringent DFS test requirements for the Band 56 frequency band.
All the above specifications will refer back to Annex 1, so you need to pay attention to the content in Annex 1 when referring to the above standards.
TELEC certification for WLAN and Bluetooth products

TELEC is Japan's mandatory certification for wireless products, somewhat similar to the domestic SRRC. It follows Japan's radio wave law. The specific test specifications follow the MIC (Ministry of Internal Affairs and Communications of Japan) Notice No. 88 regulations. See the following link http://www.tele.soumu.go.jp/j/material/test.htm. The test specifications are also updated and maintained by MIC to carry out.

The test items for WiFi and Bluetooth products are basically similar to the European standard EN300 328

Among them, the standard used by 2.4GHz WiFi products (802.11b/g, 2412~2472 MHz) and Bluetooth products is MIC Notice No.88 Annex43, but for the 14-channel (C

Bluetooth product TELEC certification test project

1. Frequency Error Measurement
2. Occupied Bandwidth and Spread-spectrum Bandwidth / Factor
3. Unwanted Emission Intensity Measurement
4. Antenna Power Error Measurement
5. Receiver spurious interference test (Limitation of Collateral Emission of Receiver Measurement)
6. Transmission Antenna Gain (EIRP Antenna Power) Measurement
7. Transmission Radiation Angle Width (3dB Beamwidth) Measurement
8. Duty Cycle Measurement
9. Retention time test

TELEC certification cycle

TELEC certification cycle is 3-4 weeks