Important reminder ⚠️⚠️⚠️
The registration fee for Canadian IC has increased by 4.4% since April 1st, subject to the issuance date!
Canada Certification and Approvals
Radio, Telecommunications Terminal Equipment (TTE) and all other electronic (digital) devices must comply with the Canadian standards. Radio Equipment usually requires Certification, whereas Terminal Equipment requires Registration (somtimes certified or registered togheter, in case of a cordless phone). A local person or company (legal entity) within Canada is required for certification. In case you don't have presence in Canada, LCS can provide access to a local representative.
Each Company seeking Certification (the applicant), the manufacturer of the equipment (the factory or manufacturing site), the local representative (legal Canadian entity), Testlab (OATS or FAR) and Certification Body (CB) must be registered at IC and have a Company Number (CN) prior to Certification.
Industry Canada Radio Certification
Radio Equipment in Canada must comply with the Radio Standard Specifications (RSS), whereas the standards are categorized in Category I and II. Category I equipment requires Certification by a recognized Certification Body (CB) or by the Certification and Engineering Bereau of Industry Canada. LCS offers the service for Industry Canada Certification. Category II Equipent does not require Certification but the manufacturer or importer must ensure compliance with the appropriate standard(s); a test report shall be available and the equiupment shall be properly labelled. Receivers can either be classified as Category I or II, whereas Category I Receivers are tunable to any frequency in the band 30~950 MHz, or are housed together with Category I transmitters, or is a scanning Receiver. All other Receivers are Caterory II Equipment.
Radio Equipment has been divided in different Types of Radio Equipment by Industry Canada, where some of the Radio Equipment is License Exempt . Testing is generally required for intentional and unintentional (conducted and radiated) emissions, and if applicable, also for Dynamic Frquency Selection (DFS), Specific Absorbtion Rate (SAR), and Hearing Aid Compatibility (HAC).
When applying for Certification, the ITU designation code(s) must be determined according to the TRC-43 specification.
Certified Radio Equipment must be labelled with model number and proper IC ID: XXXXZ-YYYYYYYY and will be published on the IC website in the Radio Equipment List (REL).
Industry Canada Terminal Equipment Approval
Terminal Equipment in Canada must comply with the Industry Canada Terminal Standard Specifications (CS-03, part I:analogue; II:digital; III:terminals; IV:terminology; V:hearing aids; VI:ISDN; VII:modems and digital substrate equipment; VIII:DSL). Industry Canada maintains a list of network Network Connection methods, Equipment Categories , and types of Network Interfaces. Terminal Equipment Registration is based on a DoC procedure (self declaration). LCS offers the service for Terminal Equipment Registration accordig to all parts of the CS-03 standard. Approved Terminal Equipment must be labelled with model number and proper IC ID: XXXX-YYYYYY and will be published on the IC website in the Terminal Equipment List (TEL).
Industry Canada EMC Approval
Electronic Equipment in Canada must comply with the EMC and other requirements as specified in the Canadian Interference Causing Equipmnet Standards (IECS). For example, ITE equipment (digital apparatus) must comply with ICES-003 and labelled with: "This Class [*] digital apparatus complies with ICES-003" and "Cet appareil numerique de la clase [*] est conforme a la norme NMB-003 du Canada", where [*] refers to the applicable emissions, either Class A or B.
Industry Canada Broadcast Equipment Approval
Broadcast Equipment must comply with the Broadcasting Equipment Technical Standards (BETS), of which some are Broadcasting Certificate Exempt Radio Apparatus.
Safety and Health Approval
In addition, all Equipment must comply with the Electrical Safety requirements in Canada. Recognized approval marks in Canada include CSA, ETL, UL, which are also valid for the USA. Medical equipment may require registration at and approval under the Food and Drug Act from (regulated by) Health Canada .
Important reminder ⚠️⚠️⚠️
The registration fee for Canadian IC has increased by 4.4% since April 1st, subject to the issuance date!
Canada Certification and Approvals
Radio, Telecommunications Terminal Equipment (TTE) and all other electronic (digital) devices must comply with the Canadian standards. Radio Equipment usually requires Certification, whereas Terminal Equipment requires Registration (somtimes certified or registered togheter, in case of a cordless phone). A local person or company (legal entity) within Canada is required for certification. In case you don't have presence in Canada, LCS can provide access to a local representative.
Each Company seeking Certification (the applicant), the manufacturer of the equipment (the factory or manufacturing site), the local representative (legal Canadian entity), Testlab (OATS or FAR) and Certification Body (CB) must be registered at IC and have a Company Number (CN) prior to Certification.
Industry Canada Radio Certification
Radio Equipment in Canada must comply with the Radio Standard Specifications (RSS), whereas the standards are categorized in Category I and II. Category I equipment requires Certification by a recognized Certification Body (CB) or by the Certification and Engineering Bereau of Industry Canada. LCS offers the service for Industry Canada Certification. Category II Equipent does not require Certification but the manufacturer or importer must ensure compliance with the appropriate standard(s); a test report shall be available and the equiupment shall be properly labelled. Receivers can either be classified as Category I or II, whereas Category I Receivers are tunable to any frequency in the band 30~950 MHz, or are housed together with Category I transmitters, or is a scanning Receiver. All other Receivers are Caterory II Equipment.
Radio Equipment has been divided in different Types of Radio Equipment by Industry Canada, where some of the Radio Equipment is License Exempt . Testing is generally required for intentional and unintentional (conducted and radiated) emissions, and if applicable, also for Dynamic Frquency Selection (DFS), Specific Absorbtion Rate (SAR), and Hearing Aid Compatibility (HAC).
When applying for Certification, the ITU designation code(s) must be determined according to the TRC-43 specification.
Certified Radio Equipment must be labelled with model number and proper IC ID: XXXXZ-YYYYYYYY and will be published on the IC website in the Radio Equipment List (REL).
Industry Canada Terminal Equipment Approval
Terminal Equipment in Canada must comply with the Industry Canada Terminal Standard Specifications (CS-03, part I:analogue; II:digital; III:terminals; IV:terminology; V:hearing aids; VI:ISDN; VII:modems and digital substrate equipment; VIII:DSL). Industry Canada maintains a list of network Network Connection methods, Equipment Categories , and types of Network Interfaces. Terminal Equipment Registration is based on a DoC procedure (self declaration). LCS offers the service for Terminal Equipment Registration accordig to all parts of the CS-03 standard. Approved Terminal Equipment must be labelled with model number and proper IC ID: XXXX-YYYYYY and will be published on the IC website in the Terminal Equipment List (TEL).
Industry Canada EMC Approval
Electronic Equipment in Canada must comply with the EMC and other requirements as specified in the Canadian Interference Causing Equipmnet Standards (IECS). For example, ITE equipment (digital apparatus) must comply with ICES-003 and labelled with: "This Class [*] digital apparatus complies with ICES-003" and "Cet appareil numerique de la clase [*] est conforme a la norme NMB-003 du Canada", where [*] refers to the applicable emissions, either Class A or B.
Industry Canada Broadcast Equipment Approval
Broadcast Equipment must comply with the Broadcasting Equipment Technical Standards (BETS), of which some are Broadcasting Certificate Exempt Radio Apparatus.
Safety and Health Approval
In addition, all Equipment must comply with the Electrical Safety requirements in Canada. Recognized approval marks in Canada include CSA, ETL, UL, which are also valid for the USA. Medical equipment may require registration at and approval under the Food and Drug Act from (regulated by) Health Canada .